Unholy Night from Archvillain Games Miniatures

5,99$

SKU: 6103 Category:

Unholy Night Miniature for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers. To reduce the amount of filament needed for generated support, we chose the best cutting model. We also hollow parts for you to save resin in the figurine’s Eco version. We also give Unholy Night’s boots, hands, platform’s stringers etc. as separate assembly pieces. So you will receive the cleanest results possible. All the assembly parts are STL files in recommended positions that make sure the smoothness of the details’ surfaces after printing. Therefore, the 3D printing beginners won’t face difficulties when placing the parts on a build plate. We cut, keyed and test print the model successfully.
The figurine is in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

WHAT WILL YOU GET AFTER PURCHASE?

– STL files of Unholy Night Miniature for 3D Printing which consist separate parts;
– High-poly detailed figurines of the miniature.
– Full technical support from the SpecialSTL Support Team.

You can get the figurines of Unholy Night Miniature for 3D Printing within 24 hours after the purchase!. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble them at SpecialSTL Youtube Channel

Also, you may like another product relate to this category

Printing Details

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec
Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.